Describing a Process or Procedural

Describing a Process or Procedures

Describing a process or Procedures means writing about how something is made or how something happens. Examples: the rainwater cycle, how coffee is grown, how glass is made, getting a driving  license, starting a business.

when to explain the step by step order of how things happen or how things get done, you are describing a process- how to get a visa, how to make coffee.

Make a rough list of the steps in the right order

Start with an introductory sentence or two about the process- how important it is, how simple it is, etc.

• In this assay, I will describe how paper is made.
• I will now explain how a photocopier works.
• Building a rood is a long process, but it can be divided into four main stages.

Use sequence words- first, next, after that, before, then, finally.

• The first stage in making glass is... In this stage, the sand is cleaned and weighed...next...After that...In the final stage, the glass is....

Finish with a concluding sentence or two.

• As you can see, paper manufacture is a difficult process. If you follow the steps described them you will be successful.
• As I have described, there are many steps involved in supplying water to a city. By using the step by step.

Example: How to make roof using sketchup

Sketchup is one of the software that has function in 3 dimensional model graphic design that is used and designed for professionals in civil and architecture.

The roof is the top cover a building that protects the inside the building from rain or snow. The shape of the roof is flat and there is a slaut, although flast should be thought to drain the water to fall.

The purpose of drawing a roof with sketchup is to speed up the manufacture and also easier to use than on manual drawing.

Material: - computer with sketchup application

                - Mouse

Steps:

1. turn on the computer. Make sure your computer or CPU is wired. After that turn on the CPU and wait a few minutes.
2. double click on the sketchup application. After the computer turn on, refresh first. Then double click the sketchup application.
3. Click rectangle to create a roofing pad. Make the size of the roof in accordance with the siz of your home.
4. After that make tile. Make roof tiles with length of 10 cm and width 5 cm. After being made to size rotate tile with a 38 degree slope. After that move the tile to the roof top. was in according
5. Push the roof pedertal and also the tile using the command follow me to form a roof.
6. Giving color. After the shape of the roof give to color to beautify the roof was in accordance with the desired roof covering.